Rolling Robot With Two Motors, But None Are On the Wheels

This unusual 3D printed Rolling Robot by [ebaera] uses two tiny hobby servos for locomotion in an unexpected way. The motors drive the front wheel only indirectly, by moving two articulated arms in a reach-and-retract motion similar to a breaststroke. The arms are joined together at the front, where a ratcheting wheel rests underneath. When the arms extend, the wheel rolls forward freely. When the arms retract, the wheel’s ratchet locks and the rest of the body is pulled forward. It looks as though extending one arm more than the other provides for rudimentary steering.

The parts are all 3D printed but some of them look as though they might be a challenge to print well due to the number of small pieces and overhangs. A short video (embedded below) demonstrates how it all works together; the action starts about 25 seconds in.

There once was a time when hobby 3D printers would struggle to produce functional shot glasses, and a hang hook or bottle opener was a triumph. Nowadays, robots with 3D printed drive trains or planetary gearboxes embedded in their wheels all created in home workshops serves as a reminder of how far things have come.

from Hackaday Click Here for full article

Leave a Reply